Today I borrowed Christina’s sewing machine to start on the 3-part panels. Construction is fairly simple; it’s just a matter of making two parallel seams that are the correct distance apart. After this step, the resulting piece gets attached the same way as the single-color panels. The stainless trim attaches by drilling through the panel, installing the clips, then bending the clips over on the back of the panel. I finished 3 panels today, only 5 more to go…
![](https://benpatterson.org/wp-content/uploads/2011/08/cropped-Bus_070109_9-1.jpg)
![](https://benpatterson.org/wp-content/themes/languages/../pencilline.png)
![](https://benpatterson.org/wp-content/themes/languages/../pencilline.png)